Tuesday, 28 August 2018

Tips To Unclog Chokes At Your Home Or Workplace

One of the most widely recognized plumbing problems is a covered sink in the kitchen or in the bathroom. With a little effort and some valuable devices, you can unclog a gagged vessel instead of bringing a plumber.

Most of the time, the asphyxiation of the kitchen sink is due to the deposits of oil or oil developed from the washing of the dishes. A basic approach to clear the gag is to pour a pot of water down the drain. However, before doing so, check if you’re metal or PVC pipe like bubbling water can damage PVC pipes. Do as such only if your tubes are made of metal.

If your pipe becomes PVC or if the above does not work, you will need a plunger to help you clean the drowned container. This useful plumbing device can be purchased at any handyman store and does not cost much. Before starting to pump the plunger, be sure to close everything out of the flood with a wet material or tape. From that moment, start pumping with the plunger for a couple of minutes and check if the drain is clean again and if it is diluted, the drain flows once more. For most basic chokes, this will often make the trap.

If it is determined that your covered tank is stopped and the plunger strategy does not work, you will need a wood screw. This valuable device can also be purchased at the tool store, but it will cost more than the plunger. Feed the twist drill into the drain opening to the point where you feel it stop. At this time, turn the handle of the key and extend the link to push the stop. Repeat this a couple of times to ensure that the obstruction is completely expelled. Check if the stop is clear. If so, run a little dilute the drain, ideally boiling water to remove any pending deposits.

There will be examples in which even the wooden sink screw neglects the eviction. If you face an inflexible pool fall, you must choose the option to evacuate the debris trap. As the water will spout when you do, reserve a bucket to counteract a ruin in your kitchen or bathroom. Expel the debris trap from the remainder of the pipeline with a torque or pipe clamp and embed the connection of the helical drill in the pipe until you feel the stop. Reverse the previous means with the torsion drill until the moment when the stop is cleared. Once this is done, reassemble the waste trap and use water, ideally high-temperature water to eliminate any outstanding buildup.

Some common things that cause home sink choke are:

1. Fabric threw by the tin bowl
2. Solidified oil and, in addition, land for a sink
3. Hairs and dirt for the bathroom floor trap

Depending on what is causing the gag, you can choose to use the snake to push and destroy whatever it is that is suffocating or trying to unite what is causing the gag. My recommendation is to remove everything that is causing the suffocation. When pushing through, it is very possible that the remains and the smoke could re-cover your pipe in another area. If this happens at a point that is too far from the point of the passage, you will need to ask a plumber to help you destroy the pipe and clean the choke for you.

Once the suffocation is eliminated, my recommendation is to perfect the opposite action. Add channels to the opening of your drain (there should not be much for the can). Refrain from pouring oil into the kitchen sink. Empty hot water in your kitchen sink once a week. Only one container or two will serve. This prevents the oil from being added.

How to prevent Chokages in your home or workplace

It is difficult when you are running a restaurant or restaurant when a pipe drowns during work hours. The work becomes much more difficult if the gag is in the kitchen, as this would delay the work speed of your kitchen staff. As the owner of the restaurant, he would also need to ensure that the water does not leak where his customers are as he could be sued (yes, I'm not kidding) if someone slips and falls.

So, what would be a good idea for you in case of a collapse? Or perhaps it allows reformulating the query to what it should not do to avoid a collapse in any case.

Never pour oil through a drain:
The motivation behind why a gag can begin to gather is a direct result of the solidification of the oil and thus trapping different particles. It is best not to pour oil through the sink or trap the floor of your kitchen.


a standout among other preventive instruments. Most bottlenecks occur because of soil collected in the pipeline that does not escape. A channel will limit the size of the ground that your pipe can transmit.

Plunger and flexible metal rod:
Continuously keep these two things in your store without equal. A plunger is an easy decision about what you can do along these lines. I will not endeavor to clarify it. The metal post would enter if the plunger stops working. Essentially use it to push down the drain until you reach the jaw part and try to reject the path.

What to do in case of home sink choke

If you have a strangled drain, you most likely look like you have a sink, a tub, or a can that is flooded. This can be a distressing circumstance, but in general, you can take care of the problem yourself. Here is what to do:

Evaluate the situation
1. Place towels around the region to soak the flood water and help prevent water from damaging the floor, and so on.

2. Verify the obvious reasons why the drain may be gagged, for example, a hard thing that fell into the sink, drain or latrine. If you can see the question, put on a pair of gloves and look for the protest. You may need to use a pair of pliers to get the question. However, if you can not get the protest or try to get the question out of the drain, simply push it down the drain, stop quickly and call a plumber for help.

3. If you can not see the explanation behind the gagged drain, you can try to clear it yourself.

Clearing the drain
1. Open the boiling water tap for a few minutes and see if the high-temperature water releases the gagged drain. Eliminate the water if it does not seem to help decrease the stop.

2. Pour a small amount of mixture drain cleaner into the drain, following the bearings in the drain cleaner compartment.

3. Make your own common drain cleaner if there is no drain cleaner nearby. The empty container that prepares pop in the gagged drain, dragged by ¼ white vinegar and salt container.

4. Sit tight for 20 minutes so that the compound drain cleaner or your common drain cleaner begins to dissolve the stop in the drain.

5. Turn on the high-temperature water tap again and allow it to continue running for a few minutes. If the drain does not begin to disappear, include more substance drainage cleanser or repeat the media with pop, vinegar and salt preparation.

If your efforts to clean the drowned drain do not work, eliminate the water supply in the house to avoid any other possible flooding. Call your neighborhood plumbing service for help. In some cases, there is a stop located on the main line of the house or business and this will require a professional plumber who has a drainage snake to discover and expel the obstruction from the drainage line before the drain legitimately operates once more.

Friday, 22 June 2018

Plumbing Tips For You To Know

In each and every home, piped connections are a necessity. Whether its water, gas or even sewerage.in most cases, these connections might at times fail. To save yourself from the headache arising from these problems, here are the best tips on plumbing.

To start with, lets focus on water connections.

water pipes are probably the most common pipes in Singapore, for every home there needs to be sufficient water in the kitchen, bathrooms, washroom and much more.

1.It is very important to avoid dropping food remains and other solid materials in kitchen sinks.
This is to avoid the sinks from clogging and accumulating dirty water. But incase this happens and the sink drain has clogged, avoid using chemicals to clear it up and instead use a drain snake and pull out the solid clogs. If this doesn’t work, you can try using a shop vacuum to help suck out the clog from the drain. Once you clear the sink drain of the clogging material, try pouring some hot water into the sink to help completely clean the drain pipe of any debris that might have been left.

In case you’re lucky enough to have a sink that has a P trap, simply remove it (the p trap) and clean the clogging debris and other solids that might have been trapped inside and fit it back. You should never be paranoid of repairing your sink drain on your own for after all, it’s not rocket science.

2.Nobody wants to pay exaggerated water or even gas bills. to avoid all this mess, make sure that your pipes are completely sealed and that there are no any leakages. Check on taps in the kitchen and bathrooms and ensure that they are not dripping even a single drop of water for the little drops from taps can waste gallons and gallons of water over a long period of time. Most leakages also occur in threads in pipes especially when we have two pipes being joined.

To avoid this, one can use a sealing compound to take care of the threads. A thread tape is just perfect for this task just in case you can’t access these sealing compounds. Roll the tape around the threads of the pipe and most preferably in the anticlockwise direction. This should create a water tight connection. For purposes of gas pipes, a thicker tape can also be used to cover the threads. Also avoid your toilet from running almost all the time. This is mostly brought about by a spoiled flapper. This is a tiny part at the toilet back made of rubber and can be easily purchased from a store nearby and replaced easily.

3.In bathrooms we have shower heads and are also prone to dripping.
When this happens, you simply have to detach the showerhead and roll some tape around the threads in the anticlockwise direction as stated above because in most cases leaks will occur due to poorly connecting threads. By applying the above, the connections become water tight and the leak will definitely stop. In some other cases, the shower head will clog maybe due to solid in water or even mineral deposits found in water. For this problem, remove the shower head and clean it up using hot water or even vinegar. Be sure to scratch it properly using a soft brush to ensure its properly cleaned.

4.The most basic factor in durability of anything is maintenance and of course we all want what we own to last for long enough.
This means that for our pipes to last, we have to maintain them. When pipes rust, it’s important to replace them with new ones. Under the kitchen sinks, pipes tend to rust faster and age faster. Incase you’re having troubles loosening an old pipe, try using a pipe wrench and if that doesn’t work try using some heat to loosen the pipe dope. However, be careful not to burn other nearby stuff.

5.For effective plumbing in Singapore, buy and install a necessary pipe for a specific function.
For instance, you cannot install a plastic PVC pipe in a bathroom that uses hot water. To add on to that get the right size of pipe you need for the job you need it to do. Be sure to check on some parameters like the amount of water you need the pipe to carry or even your personal specifications. You should avoid buying so large pipes in terms of diameter for in most cases the spaces meant for these pipes in houses are usually small. Also avoid having so many joints in your pipe network for the more the joints you have the higher the possibility of having leakages around. Let the pipes be as straight and gentle as possible.

6.Another important aspect of plumbing is a shut off valve.
This is not a must to have but its highly recommendable for purposes of conveniences and comfort. This valve works on a principle that you don’t have to shut down the supply of the whole house while repairing a given section of the same house. So, if you’re repairing your shower head in the bathroom, you can shut the supply to the bathroom and still have access to the kitchen sink.

7.Its also important to know and locate where the main supply switches and shut off points are.
This is very crucial since incase of a very bad leak that can’t be easily handled, you’ll be able to control the water and have enough time to get a solution.

8. Another useful tip would be how to detect issues with your pipe system.
In most cases when there are leaks in pipes passing above the ceiling, you’ll find the ceiling turning brown due to rust coming from the dripping water. In other cases where the water is dripping on walls, the paint on the walls starts peeling off. Sometimes the house might be filled with some foul smell which automatically means there’s an issue with either the toilet drains or even the kitchen sink.

At times water from the bathroom might not be flowing well to the drain pipe and starts accumulating on the bathroom floor. That automatically sends a message that something is wrong with the drain. the toilet might also fail to flush leaving the dirty water accumulating in the bowl. In that case, be sure to check on solids in the bowl.

Wednesday, 24 January 2018

Plumbing Tips for Toilet Bowl and Sinks

It is vital for every homeowner to ensure that the bathroom plumbing is working correctly. Whether you are building a new addition, upgrading your toilet fixtures or doing the ordinary daily plumbing activities, knowing what ought to be done is paramount in order to avoid any damages and frustrations. On one hand, some toilet plumbing is inevitable, and it might require a professional plumber to help you. On the other one also, some issues are easily avoidable via some simple toilet maintenance tips that can go a long way into saving you a lot of work, money and time.

The following are some of the tips that you can use to maintain the bowl and sinks in your toilet.

Act on Small Issues

Ensure that you do not ignore any toilet overflows which happens occasionally. This is one of the most common toilet plumbing problems. If you notice that the level of water in the bowl is about to overflow, it is the excellent time to turn on the cold water in your toilet bowl. The cold water will help to slow the flow of water, and when this happens, it prevents the water from overflowing. This is one way to cut the problem of water flooding in your toilet.

Repair any Leakages

If you notice any leaking faucets, ensure that you repair them as soon as possible. Plumbers advise that if you see any small drips from any faucets in your toilet sink fix them. The small leakages can add significant increase your water bill. Actually, the leaky faucets on a daily basis can lead to wastage of hundreds of gallons of water if the plumbing problem is not solved. For this reason, it is crucial that any faucet leakages are repaired as soon as possible. In addition to that, regular repair of the sink faucets can go a long way to help prevent any wear and tear.

Prevent Frozen Pipes
Frozen pipes are the primary cause of lack of running water in your toilet. Additionally, frozen pipes increase the chances of pipes bursting by tenfold. In order to overcome this problem, it is crucial that you leave the faucets of your toilet sink and bowl running during the night if you learn that the temperature is likely to fall lower than usual.

However, if the pipes in your toilet are already frozen, it is advisable that you use a space heater to warm the water. 10 minutes of thawing is sufficient to heat the water. However, it is paramount also not to leave the space heater to run unattended.

Perform Toilet Leak Test

It is critical that you perform tests for any leaks in your toilet. You can do so by regularly checking the level of water in your toilet tank. If you realize that the level of water is beyond the middle pipe that leads water to the toilet, make sure that you adjust the valve accordingly.

The adjustment is meant to regulate the amount of water that stops within one inch of the overflow pipe. The best way to perform the test is by adding afew drops of food colorant and wait for 15 – 20 minutes and then check the toilet bowl. If you realize that the color of the water in the bowl has changed, it is a sign that you need to replace the ball in your bowl.

Avoid Sink Build

Toilet sinks are designed to collect all the dirt that is used in the toilet – the toothpaste, hair and other things used in the bathroom. These things can lead to a buildup in the drainage pipes which over days might lead to permanent blockage of the tubes.

You can learn when the sink drainage is clogged by noticing low pressure on the water in the sink and problem with draining the water from the tub. To avoid the buildup of dirt in your toilet sink, use the following tips.

(i) Make sure that you clean your toilet sink on a weekly basis to remove any buildup of hair, toothpaste and any other dirt that might cause sink clogging. However, when cleaning the sink ensure that you use safe sink cleaning agents to keep your sink clean.

(ii) You can clean the sink by pouring hot water in the tank at least once a week to flush away any toothpaste that might be building in the sink.

(iii) If the water in the sink has low pressure, clean the aerator. The aerator of the sink is the end part of the sink where water gets out of the sink. The best way to clean the sink aerator is by removing it and then washing it with vinegar to help remove any sediments that might have build up. However, not all aerators are removable, and in such a case you can use a sink brush to wash it.

(iv) Alternatively, you can install the modern low-flow aerator which is designed to regulate the amount of water that comes out of the sink thereby allowing air to enter the sink and thus automatically maintain optimum pressure in your sink.

(v) Fix your sink with strainers. They help to catch any hair or soap chips that fall from your bathroom. However, ensure that you clean the filters on a regular basis.
(vi) Make sure that you do not put unnecessary things in the sink.

Keep the Toilet Bowl Clean

For your toilet bowl to work correctly, it is paramount that you keep it clean and adequately functional. You can achieve this through:

(a) Do not flush any items into the toilet bowl that might cause a blockage. Avoid flushing things like facial tissues, diapers, and sanitary towels.

(b) In case of any obstruction, use a bowl plunger to clear the clogs. If the plunger cannot unclog the bowl, then use the auger.

(c) Check the toilet bowl for any leaks and cracks on a regular basis.


The toilet is one of the most frequented parts of any home. Additionally, it is the room that requires maximum care and if you fail to do that it might lead to plumbing emergencies at the most inconvenient time. Toilet bowl and sink plumbing are so crucial to ensure that the home runs efficiently